Exchange Platform

Author: h.gras
Type: Example
Downloaded: 123 times
Date: 2022-11-14

Arc furnace and flicker meter

Description:
Three phase arc furnace model was developed according to CEA’s measure campaign. Flicker meter model was based on flicker meter UIE standard, it reports the values
of flicker sensation, Ifl, an... see mored short-term flicker severity, Pst.

Tag(s): arc, furnace, flicker, CEA, fluctuation, UIE, chaotic

Author: h.gras
Type: Model
Downloaded: 76 times
Date: 2022-10-20

Dynamic Exponential Load

Description:
This device is an implementation of the three-phase exponential load model. The load active power and reactive power vary as function of its voltage amplitude and frequency. This device is implemented... see more as described in [1]. It allows to perform classical and sophisticated dynamic-stability studies in EMTP. This device can be used in the load flow and time-domain simulations.

During the load initialization, the initial active power and initial reactive power are used to find the load-flow. The load voltage magnitude and phase with update from the load flow results automatically.
[1] "Load representation for dynamic performance analysis (of power systems)," IEEE Transactions on Power Systems, vol. 8, no. 2, pp. 472-482, May 1993.

Tag(s): dynamic, load, frequency, exponential, stability,

Author: h.gras
Type: Library
Downloaded: 93 times
Date: 2022-09-09

Digitial Twin Toolbox

Description:
The Digital Twin toolbox provides an example demonstrating how to synchronize EMTP device parameters with data received from a sender (Sender) through TCP/IP using the WebSocket protocol. A receiver (... see moreReceiver) accepting data in string format is also provided and may be started from the “Digital Twin Receiver” button device of the Digital Twin library.

To install:
- Download and unzip the file
- start the installer. Select the folder of the EMTPWorks version you which to add the Digital Twin Toolbox.
- Restart EMTP. A new Digital Twin library and a new Digital Twin example should be available.

More information is available from the help file of the Digital Twin device of the library.

Tag(s): digital twin, TCP, IP, scada, control room

Author: h.gras
Type: Publication
Date: 2021-11-30

Modular Multilevel Matrix Converter for Low-Frequency AC Transmission – modeling and Simulation in EMTP

Description:
Authors: Rafael Castillo-Sierra and Giri Venkataramanan
The transmission of power with AC faces limitations both to the stable operation of the electrical system and to the physical properties of... see more the transmission lines. Therefore, alternatives are being sought to mitigate these problems without the need to build new lines or replace existing ones with new, more powerful ones. In this context, a proven method makes it possible to overcome these problems by reducing the frequency at which power is transmitted. This method is known as Low Frequency AC Transmission (LFAC). In this sense, the model presented in this Research Contribution Prize Program EMTP® 2021 shows the implementation of a low-frequency transmission line in a small power system. The model presented shows a new block in EMTP of the AC/AC converter used, the Modular Multilevel Matrix Converter (MMMC) and the controls necessary for its operation. Time domain studies show that the technology is feasible and has the potential to improve the controllability and stability of transmission systems.

Tag(s): AC-AC power conversion, Electromagnetic Transient Studies in EMTP, Low frequency AC transmission, Modular Multilevel Matrix Converter

Author: rcastilloj
Type: Model
Downloaded: 94 times
Date: 2021-10-01

Power System with a Transmission Line operating at low frequency

Description:
Demonstration of the operation of a power system with a transmission line in low frequency. This model contains a 5-bus power system with a transmission line operated at a frequency of 41Hz.
The ... see moresystem includes:
- Model of frequency converters (averaged model of the Modular Multilevel Matrix Converter, MMMC).
- Converters control schemes.
- Initialization branches to include the low frequency line in the steady-state calculation.
- Internal variables of the converters such as voltages in the storage capacitors, branch currents, internal voltages, among others, can be plotted.
- External variables to the converters such as power flow in the low frequency line, currents and voltages can also be plotted.

Tag(s): MMMC, Low-Frequency AC Transmission, Power System Operation, Power converters, Control of power converters